Skip to main content
Wi-Fi coverage fix

Wi-Fi drops out in the same spots every day? We'll find the cause and fix the weak areas.

  • One room
  • Devices disconnect when people move
  • The warehouse
  • Extenders were added but

Back offices, upstairs rooms, warehouses and outdoor areas often get little or no Wi-Fi, and people end up working around it. We measure the signal where it fails, find out what's blocking it, and fix the coverage so those areas work like the rest of your premises.

  • Same-day or next-day, where available
  • Onsite across Perth, or remote
  • No lock-in contract
  • Business and home IT
Common problems

Where does your Wi-Fi give up?

  • One room, floor or corner has weak or no signal
  • Devices disconnect when people move around the premises
  • The warehouse, workshop or outdoor area has no usable Wi-Fi
  • Extenders were added but the problem keeps coming back
  • Card terminals or scanners drop out in certain spots

Wi-Fi poor across the whole office, not just a few spots? See Office Wi-Fi design & installation.

How we fix it

How we fix coverage problems

  1. Measure where it fails

    We walk the affected areas and measure signal strength room by room.

  2. Find the cause

    Distance, walls, metal shelving, interference or a poorly placed access point.

  3. Recommend the fix

    Moving equipment, changing settings, or adding an access point. We confirm the cost before any work starts.

  4. Make the change

    Settings are adjusted or equipment is installed, which we can supply or you can buy.

  5. Test again

    We measure the same areas to confirm the signal is now strong.

How it works

From problem to fixed, in three steps

  1. Book online or call

    Tell us what's happening and how many people are affected.

  2. We connect or come to you

    Many problems can be resolved through a remote session you approve. We come onsite when the job needs it.

  3. We resolve and test

    We work through the cause and check the result with the people affected.

What you get

What you get

  • The cause of the weak spots found and explained
  • Coverage fixed in the areas that were dropping out
  • Signal measured before and after
  • Notes on any equipment or settings changed
Why PCE

Why Perth businesses call PCE

No lock-in

Book a technician when you need one. No ongoing managed-services contract required.

Onsite or remote

We choose the route that gets you working again, and come onsite when it's needed.

Plain-English notes after every job

You'll know what was wrong, what we changed and what to watch for.

No-fix and 14-day assurance

If we can't resolve the agreed problem or give you a practical next step, you won't pay for technician time. Same problem back within 14 days? We'll reassess it. Conditions apply. See terms.

Questions

Wi-Fi coverage answered

Can't we just add a Wi-Fi extender?+

Sometimes it helps, but extenders often halve speeds and confuse devices. We'll recommend what actually fixes the area.

Will we need new equipment?+

Not always. Some problems are fixed by moving equipment or changing settings. If new equipment is needed, we'll tell you before going ahead.

Can you get Wi-Fi into a warehouse or outdoor area?+

Usually, yes, with the right equipment placed properly. We check the area first.

Will this affect the rest of our Wi-Fi?+

No. Changes are made so the rest of your network keeps working as it does.

Service area

We cover most of Perth

Onsite across most of the Perth metro area, and remote help anywhere in Perth.

  • Onsite across most of the Perth metro area
  • Remote help anywhere in Perth
See all service areas →

Get Wi-Fi into every corner of your business

Book an experienced technician online, or tell us what's happening and we'll recommend the right next step.

Call 08 6559 6485

Phones and technicians: Monday to Friday, 8am to 4pm